Flag Mast


Flag Mast

Specifications

Height 10mtr to 45mtr
Htickness 3mm to 8mm
Diameter Up to 960mm
Base Plate Diameter 1180mm
Wind Speed As per is 875 (part-3):2015/as per Customer Requirement
Galvanizing As per is 4759 : 1996 / is 2629 : 1985 / Bsen Iso 1461 : 2009
Design As per is 875 Part-3:2015, is 800 : 2007 / is 6533:1989 (p-2) / Bs 5649 : 1985 / En 40, Ile Tr-7:200
Welding As per is 10178 : 1995/ is 9595 : 1996
As per ILE TR 7:2000.
Motor As per IS 325:1996 (3PH A.C., 415V, 4/6 Pole, 1HP to 3HP)
Winch 350KGS, 500 KGS, 750 KGS (SGDD/DGDD) & 1500 KGS (DGDD).
Wire Rope Stainless Steel 6MM, 8MM, AISI 316, 7/19 Construction.
Pulley LM 6 with Self-lubricating PB bush.
Hardware Stainless Steel
Tolerances As per BS 5649 : 1978/EN 40, IS 1852: 1985

Features

  • In house Design facilities (Structural & Foundation) with PLS/Special software (validate from IIT-Kharagpur)
  • Electroplated rope drum, sprocket and torque limiter which do not rust.
  • Rope drum of winch have one left hand and other right hand groove for better alignment of ring.
  • Seven tanks and zero discharge galvanizing process with Flux tank heated by superheated steam for better Adhesion of zinc coating.
  • All testing facility available in plant including Spectrometer for chemical analysis.
  • All the hardware supplied are stainless steel for better life.
  • Our head frame have stainless steel axle with anti rotation clamp to prevent damage of axle and stainless steel guide roller for smooth rolling of cable and rope.
  • Heavy duty drive chain (1/2 inch pitch) for lifting the ring.
  • We provide double safety protection of motor (one mechanical and one electrical)
  • Optionally we provide anti thief nut for foundation bolt with specially developed wrench for High mast.
  • All winch & Motor tested with proper load before dispatch.
  • Structural Design is checked for all orders before production.
  • Wind tunnel test from IIT-Kanpur.

 

Material :

Shaft– High tensile sheet/Plate Equivalent to BSEN 10025 : 2004 / IS 2062 : 2011 Gr.E350BR / IS 5986 : 2011 Gr 355, Base Plate- As per IS 2062 : 2011 Gr.E250A, Foundation Bolt- IS 1367 : 1994 / IS 2062 : 2011 Gr.E250A


Yes! I am interested

Submit Your Requirement



  • Explore More Products




Looking for "Flag Mast" ?