Signage Mast


Signage Mast

Specifications

Height 10mtr to 45mtr
Htickness 3mm to 8mm
Diameter Up to 960mm
Base Plate Diameter 1180mm
Wind Speed As per is 4759 : 1996 / is 2629 : 1985 / Bsen Iso 1461 : 2009
Design As per is 875 Part-3:2015, is 800 : 2007 / is 6533:1989 (p-2) / Bs 5649 : 1985 / En 40, Ile Tr-7:200
Welding As per is 10178 : 1995/ is 9595 : 1996
Motor As per IS 325 :1996 (3PH A.C., 415V, 4/6 Pole, 1HP to 3HP)
Winch 350KGS, 500 KGS, 750 KGS (SGDD/DGDD) & 1500 KGS (DGDD).
Wire Rope Stainless Steel 6MM, 8MM, AISI 316, 7/19 Construction.
Trilling Cable As per IS 9968/P-1:1988 [ 2.5sq 5/8core, 4sq 5/8core, EPR Insulated, PCP Sheathed.
Wiring Cable As per IS 694:1990
Pulley LM 6 with Self- lubricating PB bush.
Hardware Stainless Steel
Feeder Pillar Box As per customer requirement
Tolerances: As per BS 5649 1978/EN 40, IS 1852: 1985

Features

  • In house Design facilities (Structural & Foundation) with PLS/Special software (Validate from IIT-Kharagpur)
  • Available both in three point and two point suspension.
  • Electroplated rope drum, sprocket and torque limiter which do not rust.
  • Rope drum of winch have one left hand and other right hand groove for better alignment of ring.
  • Available both Detachable arm and fixed arm Lantern Ring.
  • Seven tanks and zero discharge galvanizing process with Flux tank heated by superheated steam for better Adhesion of zinc coating.
  • All testing facility available in plant including Spectrometer for chemical analysis.
  • All Trailing cables confirm to IS 9968 (P-1) for safety and durability.
  • All the hardware supplied are stainless steel for better life.
  • Our head frame have stainless steel axle with anti rotation clamp to prevent damage of axle and stainless steel guide roller for smooth rolling of cable and rope.
  • Heavy duty drive chain (1/2 inch pitch) for lifting the ring.
  • We provide safety locking rope for high mast safety.
  • We provide double safety protection of motor (one mechanical and one electrical)
  • Optionally we provide anti thief nut for foundation bolt with specially developed wrench for High mast.
  • Can provide both PVC and HDPE buffer arrangement for Lantern Ring.
  • All winch & Motor tested with proper load before dispatch.
  • Structural Design is checked for all orders before production.
  • Wind Tunnel test from IIT-Kanpur.

Yes! I am interested

Submit Your Requirement



  • Explore More Products




Looking for "Signage Mast" ?